#!/bin/csh -f  

#The following environment variables were active:
setenv GOA /GIPSY_source/goa-5.0
#You may need the following source command to set your PATH if you have changed it
source   /GIPSY_source/goa-5.0/rc_gipsy.csh 
( gd2p.pl \
      -i ostm1970.10o \
      -r 300 \
      -d 2010-07-16 \
      -w_elmin 0.0 \
      -pb_min_slip 10.0 \
      -e "-a 10 -PC -LC" \
#     -amb_res 10 \
      -n JA2 \
      -gen_eci "echo Using leo_nom.eci for nominal solution" \
      -oi_template /home/ftp/pub/usrs/bjh/garland/jason2_new/run/templates/template_custom.nml \
      -trjnml /home/ftp/pub/usrs/bjh/garland/jason2_new/run/templates/template_trajedy.nml \
      -q leo.quat \
      -dwght 1e-05 0.0004 \
      -dfp 3 \
      -rfp 1 \
      -CG_Phs 1.408794 -0.2171 -0.592275 \
      -CG_Code 1.408794 -0.2171 -0.592275 \
      -AntOr 0.258969313954337 0.0 -0.965885549343202 -0.965885549343202 0.0 -0.258969313954337 \
      -post_wind 0.005 5e-05 \
      -post_wind_red 0.001 2.5e-05 \
      -oi_prtls_rd COS1_C 2 2 6750 21600 SIN1_C 2 2 6750 21600 COS1_L 2 2 6750 21600 SIN1_L 2 2 6750 21600 CONST_L 1 1 1800 21600 CONST_H 1 1 1800 21600 \
      -oi_prtls_dyn DRAG 1000 COS1_C 1.0e8 COS1_L 1.0e8 SIN1_C 1.0e8 SIN1_L 1.0e8 \
      -start "16-JUL-2010 00:00:00.0000" \
      -stop "17-JUL-2010 00:00:00.0000" \
      -AntCal  /home/ftp/pub/usrs/bjh/garland/jason2_new/run/templates/GPS1_LCPC_dynorb_flinnr_3.xyz \
      -orb_clk "flinnR /home/ftp/pub/usrs/bjh/garland/jason2_new/run/JPL_GPS_Products/2010" \
 > gd2p.log ) |&  sed '/^Skipping namelist/d' > gd2p.err 

